KBIC

TPL-DR,access and alarm PoE controller for DIN rail installations

The TPL-DR provides the advantage of installation on DIN rails,

while being powered directly from the network.

The TPL-DR controller is an ergonomic controller

with standard dimensions (236 x 128 mm) for use on DIN rails. For use in 19″ standing cabinet, DDS has designed a 19″
rack that accommodates up to 4 TPL-DR. A front panel provides the LED signals for power and communication.
The TPL-DR / PoE controller does not require external power supply.
It is powered directly over the Ethernet network via the TCP/IP cable,
thanks to its on-board PoE 12W power supply (if such a power is delivered by the network).
This on-board PoE power supply powers the TPL-DR and its 4 readers, as well as a second controller (not PoE) and its 4 readers.

The TPL-DR exists in several configurations:

– TPL-DR DIN rail standard – TPL-DR / IP with IP on board – TPL-DR / PoE with PoE – TPL-DR / PoE IP with PoE and IP on board
– Those configurations are available for the TPL-DR (4 readers / 2 doors) and for the TPL-DR-D4 (4 readers / 4 doors).

The controller has 12 supervised inputs,

4 outputs (expandable to 52 outputs with 3 satellites), 2 serial communication ports and 4 readers.
Each reader gets its own LEDs (pass and fail), as well as a buzzer signal.

The 512K controller allows monitoring the entrance / exit

of up to 44K cardholders and it can store up to 47K events in memory (See table below). By default, the controller capacity is 2K cardholders.